T30U Power Products Generating set, equipped with a MITSUBISHI engine and MECC ALTE alternator. .

ORDER

General specifications

Alternator specifications

Engine specifications

Dimensions

Control panels

 

General specifications

General characteristics

Engine type S4S-SD
Alternator type ECP28VL-F12
Performance class G2
Frequency (Hz) 60
Reference voltage (V) 480/277
Max power ESP (kVA) 37.50
Max power ESP (kWe) 30
Max power PRP (kVA) 34.09090909090910
Max power PRP (kWe) 27.27272727272730
Intensity (A) 45
Standard Control Panel NEXYS
Optional control panel TELYS
Optional Control Panel N/A
Optional control panel N/A

Descriptive

Mechanic governor
Mechanically welded chassis with antivibration suspension
Main line circuit breaker
Radiator for wiring temperature of 48/50°C max with mechanical fan
Protective grille for fan and rotating parts
9 dB(A) silencer supplied separately
Charger DC starting battery with electrolyte
12 V charge alternator and starter
Delivered with oil and coolant -30°C
Manual for use and installation

Power

Voltages ESP PRP Back-up
power
kWe kVA kWe kVA
480/277 30 38 27 34 46
440/254 30 38 27 34 50
220/127 30 38 27 34 100
208/120 29 36 26 33 100

Alternator specifications

GENERAL DATAS

Alternator brand MECC ALTE
Alternator type ECP28VL
Number of phase 3
Power factor (Cos Phi) N/A
Altitude (m) 0 à 1000
Overspeed (rpm) 0
Number of pole 4
Excitation system AVR
Insulation class H
T° class, continuous 40°C N/A
Regulation DSR
Harmonic factor, no load TGH/THC (%) N/A
Wave form : NEMA=TIF-(TGH/THC) N/A
Wave form : CEI=FHT-(TGH/THC) N/A
Number of bearing 1
Coupling Direct
Voltage regulation at established rating (%) N/A
Recovery time (Delta U = 20% transcient) (ms) N/A

OTHER DATAS

Continuous Nominal Rating 40°C (kVA) 30
Standby Rating 27°C (kVA) 38.40
Efficiencies 4/4 load (%) 89.80
Air flow (cfm) 0.096
Short circuit ratio (Kcc) 0.62
Direct axis synchro reactance unsaturated (Xd) (%) 165
Quadra axis synchro reactance unsaturated (Xq) (%) 71
Open circuit time constant (T''do) (ms) 930
Direct axis transcient reactance saturated (X''d) (%) 15
Short circuit transcient time constant (T''d) (ms) 46
Quadra axis subtranscient reactance saturated (X""q) (%) 19
Subtranscient time constant (T""d) (ms) 12
Quadra axis subtranscient reactance saturated (X""q) (%) 19
Zero sequence reactance unsaturated (Xo) (%) 2.80
Negative sequence reactance saturated (X2) (%) 13.20
Armature time constant (Ta) (ms) 11
No load excitation current (io) (A) 0.55
Full load excitation current (ic) (A) 1.90
Full load excitation voltage (uc) (V) 0
Recovery time (Delta U = 20% transcient) (ms) N/A
Motor start (Delta U = 20% perm. or 50% trans.) (kVA) 0
Transcient dip (4/4 load) - PF : 0,8 AR (%) 0
No load losses (W) 0
Heat rejection (W) 3271

Engine specifications

GENERAL ENGINE DATAS

Engine model MITSUBISHI
Engine type S4S-SD
Air inlet Athmo
Air coolant N/A
Number of cylinders 4
Cylinder arrangement L
Displacement (C.I.) 3.33
Bore (mm) 94
Stroke (mm) 120
Compression ratio 22 : 1
Speed (RPM) 1800
Pistons speed (m/s) 7.20
Maximum stand-by power at rated RPM (kW) N/A
Frequency regulation (%) +/- 2.5%
BMEP (bar) 0
Governor type Mechanical

EXHAUST

Exhaust gas temperature (°C) 600
Exhaust gas flow (L/s) 122
Max. exhaust back pressure (mm EC) 680

FUEL

Fuel consumption 110% load (L/hr) 11.50
Fuel consumption 100% load (L/hr) 9.80
Fuel consumption 75% (L/h) 8.20
Fuel consumption 50% (L/h) 6
Maximum fuel pump flow (L/h) 36

OIL BALANCE

Oil capacity (L) 10
Min. oil pressure (bar) 1
Max. oil pressure (bar) 5
Oil consumption 100% load (L/h) 0.11
Carter oil capacity (L) 9

HEAT

Heat rejection to exhaust (kW) 35
Radiated heat to ambiant (kW) 6
Haet rejection to coolant (kW) 35

AIR INTAKE

Max. intake restriction (mm EC) 200
Intake air flow (L/s) 45

COOLING SYSTEM

Radiator & Engine capacity (L) 8.90
Max water temperature (°C) 100
Outlet water temperature (°C) 93
Fan power (kW) 2
Fan air flow w/o restriction (m3/s) 1
Available restriction on air flow (mm EC) 10
Type of coolant Glycol-Ethylene
Thermostat (°C) 76.5-90

EMISSIONS

Emission PM (g/kWh) N/A
Emission CO (g/kW.h) N/A
Emission HCNOx (g/kWh) N/A
Emission HC (g/kW.h) N/A

Dimensions

DIMENSIONS COMPACT VERSION

Length (mm) 1700
Width (mm) 896
Height (mm) 1144
Dry weight (kg) 670
Tank capacity (L) 100

DIMENSIONS SOUNDPROOFED VERSION

Canopy M127
Length (mm). 2080
Width (mm). 960
Height (mm). 1415
Dry weight (kg). 900
Tank capacity (L). 100
Acoustic pressure level @1m in dB(A) 76
Acoustic pressure level @7m in dB(A) 66

CONTAINMENT

Canopy M127 DW
Length (mm). 2160
Width (mm). 966
Height (mm). 1582
Dry weight (kg). 1080
Tank capacity (L). 230
Acoustic pressure level @1m in dB(A) 76
Acoustic pressure level @7m in dB(A) 66

Control panels

NEXYS, comprehensive and simple

The NEXYS is a versatile control unit allowing operation in manual or automatic mode. Equipped with an LCD screen, the user-friendly NEXYS offers high-quality basic functions to guarantee simple, reliable operation of your generating set.

Offers the following functions:

Standard electrical measurements: voltmeter, frequency meter, ammeter.
Engine parameters: working hours counter, engine speed, battery voltage, fuel level.
Alarms and faults: oil pressure, coolant temperature, failure to start, overspeed (> 60 kVA), charging alternator fault, low fuel level, emergency stop.

TELYS, ergonomic and user-friendly

The highly versatile TELYS control unit is complex yet accessible, thanks to the particular attention paid to optimising its ergonomics and ease of use. With its large display screen, buttons and scroll wheel, it places the accent on simplicity and communication.

The TELYS offers the following functions:

Electrical measurements: voltmeter, frequency meter, ammeter.
Engine parameters: working hours counter, oil pressure, coolant temperature, fuel level, engine speed, battery voltage.
Alarms and faults: oil pressure, coolant temperature, failure to start, overspeed, alternator min./max., battery voltage min./max., emergency stop, fuel level.
Ergonomics: wheel for navigating around the various menus.
Communication: remote control and operation software, USB connections, PC connection.